| Barn Pros
Barn House Package |
| |
|
| |
5 sets of working blueprints
Engineering packet with wind and snow loads
Full lumber
package |
|
| |
| Materials include: Some
packages may vary from this list |
| |
| Barn House Framework System with roof and 18” overhangs
all around |
| • |
Treated posts (in the walls), 6” x 8” for
mainframe (Hemlock - .60 retention) |
| |
• |
Pole building posts engineered to be buried in concrete |
| • |
Interior exposed mainframe poles, 6” x10” Doug
Fir (#1KDDF) |
| |
• |
Poles rest in steel saddle installed in concrete floor |
| • |
Double 4” x 12” Doug Fir beams
(#1KDDF) |
| |
• |
Bolted to the 6” x 8“ treated wall post and spliced together at the roof ridge
with large black steel splice plates |
| • |
4” x 8” Doug Fir purlins (#1KDDF)
- 4’0” on center |
| • |
2” x 6” “Select grade” SPF
T&G exposed ceilings |
| • |
2’ x 12” roof system (Hem-fir/standard
and better rating) |
| |
• |
24” on center provides space
for R-38 fiberglass insulation batts |
| • |
7/16” OSB 4’ x 8’ roof
sheeting |
|
| |
| Exterior Wall Materials: |
| • |
2” x 6” stud walls (Hem-fir/standard
and better rating) |
| |
• |
Installed between the exterior
6” x 8” treated posts |
| • |
7/16” OSB wall sheeting |
| • |
Tyvek house wrap for vapor and moisture seal |
| • |
2” x 8” “Select grade” Spruce
log siding |
| • |
1”x 6” TK cedar trim on corners |
| • |
Note: Exterior walls bolt down to a full
4” concrete slab with a thickened edge approximately
6” wide x 24” deep with #4 rebar (supplied
by customer) |
|
| |
| 2nd Floor System: |
| • |
6” x 12” Doug Fir beams (#1KDDF) |
| |
• |
12’ 0” on center |
| • |
4” x 10” Doug Fir floor joists
(#1KDDF) |
| |
• |
4’ 0” on center w/exposed
black steel hangers |
| • |
2” x 6” “Select grade” SPF
T&G |
| |
• |
Exposed 1st floor ceilings & upstairs
flooring |
|
| |
| Kit also includes: |
| • |
1” x 12” TK cedar to enclose
roof overhang |
| • |
1” x 12” TK cedar Board & Batt
siding on gable ends |
| • |
Engineered blueprints and calculations |
| • |
Master Ship List complete lumber take-off |
| • |
Concise “Procedure Guide” installation
instructions with pictures |
| • |
One set of hand-built hayloft doors for front
gable end |
| |
• |
Non functional decoration |
| • |
Hand-built custom cedar cupola |
| |
• |
Non functional decoration |
|
| |
| Barn Pros “Signature Service” provides: |
| • |
Toll-free customer construction hotline to help with
construction questions |
| • |
Additional lumber provided to ensure sufficient quantity
to construct |
|
| |
| NOTE: |
| • |
Interior walls and partitions are non-load bearing walls
and can be rearranged or removed |
| • |
Windows, doors, fireplace, furnishings, fixtures, insulation,
utilities, etc., supplied by customer |
| • |
2” x 6” T&G is “Select grade” SPF
milled to both surfaces |
| • |
Doug Fir Beams are #1 Kiln Dried Douglas Fir (#1KDDF)
and Free of Heart Center (FOHC) |
| • |
Package does not include concrete, nails, roofing or
labor to build |
| • |
All permits and related fees are purchaser’s responsibility |
|
