| Barn
Pros Standard Barn Kit Package |
| |
|
| |
5 sets of working blueprints
Engineering packet with wind and snow loads
Full lumber package complete with hayloft and trim
All materials to build barn (except concrete, nails, roofing) |
|
| |
| Materials include: Some
packages may vary from this list |
| |
| Barn Framework System with roof and 20” overhangs
all around |
- Treated posts, 6”x 6” and 6”x 8”,
for mainframe (Hemlock - .60 retention pole building
posts engineered to be buried in concrete)
- Versa-lam beams 1 ¾” x 11 7/8” for roof
rafters
- 2”x 8” roof purlins and outrigger material
(Hem-fir/standard and better rating)
- 2”x 6” cleat material (Hem-fir/standard and
better rating)
- 7/16” OSB 4’x 8’ roof sheeting
- 2”x 6” “Select grade” SPF T&G
walls all around
- T-1-11 gable ends with 2”x 6” studs (1” x
12” tight knot (TK) cedar S1S2E board with 1”x
3” S1S2E TK cedar batts, optional)
- 1”x 10” fascia and 2”x 8” bargeboard (Hem-fir/standard
and better rating)
- 1”x 6” TK cedar trim on corners
|
| |
| Stall package includes: |
- Barn Pros Custom Stall Fronts (steel bar stall fronts with
feeder window - hot-dipped galvanized)
- Barn Pros Custom Stall Front Doors (steel bar sliding door
with hardware - hot-dipped galvanized)
- Heavy-duty galvanized metal chew protection for corners
and edges
- 2”x 6” “Select grade” SPF T&G
removable stall divider and metal retainer channels
- Dutch door turnouts – 4’x 7’ T&G
(2”x 6” “Select grade” SPF T&G)
with hardware and necessary 4”x 6” treated post
for opening
- Rubber mats for floor (3/4”+ high quality, solid
rubber, non-absorbent)
|
| |
| Tack Room package includes: |
- 2”x 6” “Select grade” SPF T&G
walls
- One 4’x 7’ T&G entrance door (2”x
6” “Select grade” SPF T&G)
- Pre-cut single-turn stairway with handrail (2”x 12” Hem-fir
pre-cut stringers, 2”x 2” pickets with 2”x
6” rail material
- 3’x 6’8” T&G Loft entrance door at
top of stairs (2”x 6” “Select grade” SPF
T&G)
- One 3’0” x 3’6” Window
|
| |
| Breezeway package includes: |
- Two 6’x 9’ track doors at each end of breezeway
(1”x 6” T&G pine and 1”x 6” pine)
with all necessary hardware
|
| |
| Loft package includes: (If applicable) |
- 2”x 10” joist (Hem-fir/standard and better
rating)
- Versa-lam rim joists 1 3/4” x 11 7/8”
- 3/4” CDX floor sheeting (T&G)
- 48” tall T&G loft liner rail for safety and dust
control (2”x 6” “Select grade” SPF
T&G)
- Loft loading doors at one end of barn
|
| |
| Wash Rack package includes: |
- T&G walls (2”x 6” “Select grade” SPF
T&G)
- Open to aisle
|
| |
| Kit also includes: |
- All pre-built door packages
- All the handles and hardware
- Large black hinges and galvanized hinges
- All thru-bolts
- Tracks
- Latches
- Trolleys
- Hangers
- Engineered blueprints and calculations
- Master Ship List complete lumber take-off
- Concise “Procedure Guide” installation instructions
with pictures
- Hand-built custom cedar cupola to vent hayloft
|
| |
| Barn Pros “Signature Service” provides: |
- Toll-free customer construction hotline to help with construction
questions
- Additional lumber provided to ensure sufficient quantity
to construct
- Barn Pros “Lifetime” Limited Structural & Hardware
Warranty
|
| |
| NOTE: |
- 2”X 6” T&G is SPF “Select grade” milled
to both surfaces
- Package does not include concrete, nails, roofing or labor
to build
|
| |
| All permits and related fees are purchaser’s responsibility |